GreatWall Company

Three-Ring Micro Powder MillHome >> Products >> Series of Mills >> Three-Ring Micro Powder Mill

Three-ring Micro Powder Mill

Three-ring Micro Powder Mill

Three-ring Micro Powder Mill is designed to produce super-fine powder or micro powder of different materials with hardness less than 6 in Mohs scale and humidity less than 6 percent such as kaolin, limestone, calcite, marble, talcum, barite, gypsum, dolomite, bentonite mud, mica, pyrophyllite, sepiolite, diatomite, graphite, alunite, fluorite, potassium feldspar, phosphorite, pigment and so on.

(Click this button to inquiry)

  • Usage and Application
  • Working principle
  • Features
  • Main Specifications

The machine is designed to produce super-fine powder or micro powder of different materials with hardness less than 6 in Mohs scale and humidity less than 6 percent such as kaolin, limestone, calcite, marble, talcum, barite, gypsum, dolomite, bentonite mud, mica, pyrophyllite, sepiolite, diatomite, graphite, alunite, fluorite, potassium feldspar, phosphorite, pigment and so on. The granularity of the end products is 325-2500 meshes (0.044-0.0055mm).

The motor of main equipment drives the main shaft and dial through reducer, and the dial drives numbers of rollers moving in the ring channels via pins. After being crushed by hammer crusher, big materials become small ones and they are sent to the hopper by elevator. The electromagnetic vibrating feeder sends them to the middle of first layer of dial evenly; the materials will be driven to the edge of dial by centrifugal force and fall into the ring channels and are pressed, crushed and ground by the grinding rings and rollers. After ground in the first layer of the dial, the materials fall into the second and third layer and are crushed and ground. The high pressure centrifugal blower inhales air from the outside and blow the materials from the third layer to powder classifier. The rotating turbo in the powder classifier makes the coarse materials return to the mill and reground, while the fine powder mixed in the air goes into the cyclone collector and is discharged from the bottom via discharge valve. The air with very little powder is purified by pulse dust catcher and discharged by blower and muffler.

High-efficiency and low consumption 
With the same fineness of end products and motor power, its output is two times higher than that of Jet Mill, Mix Mill, and Ball Mill.
Quick-wear parts with longer working life 
The grinding rollers and rings are made of special materials. Generally, their work life is more than one year and it could be as long as two years when processing calcium carbonate.
Security and Reliability 
Because there are no rolling bearing and bolts in the grinding chamber, the problems of easily damaged bearings and sealings as well as machine damage due to the bolts looseness are avoided. 
Cleansing and Environment Protection 
The adoption of pulse dust collector and muffler reduces the industrial dust pollution and noise, which reaches the National Standard.
Model Roller Numbers
(pcs)
Ring Diameter
(mm)
Ring Numbers
(pcs)
Max. Feeding Size
(mm)
Output
size
(mm)
Capacity
(kg/h)
Motor Power
(Kw)
Overall
Dimension
(mm)
CZM60 15 Φ600 1 10 0.044-0.005 350-2500 37 10000×2500×5500
CZM80 21 Φ800 1 10 0.044-0.005 600-4500 55 13000×3000×6400
CZM100 27 Φ1000 1 10 0.044-0.005 900-6500 110 18000×4000×8300

Note: Any Change of technical data shall not be advised additionally.

Inquiry

Contact Us

0086-371-63769782

0086-371-63769781

sales@greatwallcrusher.com